Epoxy Colorant

Tinted PSC 2301 is prepared by first mixing resin (A) and the colorant together, then mixing hardener (B) into the tinted Part A. Do not count colorants into the volume ratio of Part A, resin, or Part B, hardener. When using more than one can of colorant, it is recommended to mix all the colorant cans in a container prior to use in order to get a consistent color. This is due to the unavoidable variations between cans/batches or small amounts of colorant left in the cans.

- The Part A, resin, must be thoroughly mixed with colorant prior to the addition of Part B, hardener.

- Carefully empty the contents of Part B, hardener, entirely into the mixing container of Part A, resin.

- Mix with very low speed jiffy mixer, until completely blended. Be careful not to introduce air bubbles while mixing. -

Due to the difference in viscosity between Part A, resin, and Part B, hardener, care must be taken to thoroughly mix both components in order to avoid partially cured and weak spots in the coating.

For Colors # 01, 03, 04, 06, 20, 21,

3 gallon kit = 1 quart (0.9 L)

15 gallon kit = 5 quarts (4.7 L)

Colors # 10, 11, 30, 35, 60

3 gallon kit = 2 quarts(1.9 L )

15 gallon kit =10 quarts (9.5 L)